Vulcan-Hart VTEC25 Manual de Instalação descarregar pdf (Página 2)

– 2 –

MGB-A OPERATING, INSTALLATION, SERVICE & PARTS

IMPORTANT

OPERATING, INSTALLATION AND SERVICE PERSONNEL

Operating information for this equipment has been prepared for use by qualified and/or authorized

operating personnel.

All installation and service on this equipment is to be performed by qualified, certified, licensed and/or

authorized installation or service personnel, with the exception of any marked with a in front of

the part number.

Service may be obtained by contacting the Factory Service Department, Factory Representative or

Local Service Agency.

DEFINITIONS

QUALIFIED AND/OR AUTHORIZED OPERATING PERSONNEL

Qualified or authorized operating personnel are those who have carefully read the information in this

manual and are familiar with the equipment’s functions or have had previous experience with the

operation of the equipment covered in this manual.

QUALIFIED INSTALLATION PERSONNEL

Qualified installation personnel are individuals, a firm, corporation or company which either in person

or through a representative are engaged in, and are responsible for:

1. The installation of gas piping from the outlet side of the gas meter, or the service regulator when

the meter is not provided, and the connection and installation of the gas appliance. Qualified

installation personnel must be experienced in such work, be familiar with all precautions required,

and have complied with all requirements of state or local authorities having jurisdiction. Reference

in the United States of America - National Fuel Gas code ANSI Z223.1 (Latest Edition) In Canada-

Canadian Standard CAN1-B149.1 NAT. GAS (Latest Edition) or CAN1-B149.2 PROPANE (Latest

Edition).

2. The installation of electrical wiring from the electric meter, main control box or service outlet to the

electric appliance. Qualified installation personnel must be experienced in such work, be familiar

with all precautions required, and have complied with all requirements of state or local authorities

having jurisdiction. Reference: In the United States of America-National Electrical Code ANSI

NFPA No. 70 (Latest Edition). In Canada-Canadian Electrical Code Part 1 CSA-C22.1 (Latest

Edition).

QUALIFIED SERVICE PERSONNEL

Qualified service personnel are those who are familiar with Vulcan equipment who have been endorsed

by the Vulcan-Hart Corporation. All authorized service personnel are required to be equipped with a

complete set of service parts manuals and stock a minimum amount of parts for Vulcan equipment.

SHIPPING DAMAGE CLAIM PROCEDURE

For your protection, please note that equipment in this shipment was carefully inspected and packed by

skilled personnel before leaving the factory. The transportation company assumes full responsibility for

safe delivery upon acceptance of this shipment.

If shipment arrives damaged:

1. VISIBLE LOSS OR DAMAGE — Be certain this is noted on freight bill or express receipt and signed

by person making delivery.

2. FILE CLAIM FOR DAMAGES IMMEDIATELY — Regardless of extent of damage.

3. CONCEALED LOSS OR DAMAGE — If damage is unnoticed until merchandise is unpacked, notify

transportation company or carrier immediately, and file “concealed damage” claim with them. This

should be done within (15) days of date of delivery is made to you. Be sure to retain container for

inspection.

We cannot assume responsibility for damage or loss incurred in transit. We will, however, be glad to

furnish you with necessary documents to support your claim.

PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE

1 2 3 4 5 6 7 ... 15 16

Comentários a estes Manuais

Sem comentários

Vulcan-Hart VTEC25 Manual de Instalação Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com não Vulcan-Hart VTEC25