Vulcan-Hart GCO2D Especificações descarregar pdf (Página 16)

— 16 —

ON/OFF/OVEN COOL SWITCH

1. ON turns oven control circuits on.

2. OFF turns oven control circuits off.

3. OVEN COOL allows the fan motor to run with the doors ajar to speed oven

cooling.

GAS VALVE

When ON, allows gas to flow to the ignition system.

LIGHTING THE GCO2C OVEN

1. Turn manual gas valve ON.

2. Push ON/OFF/OVEN COOL switch to the ON position and set THERMOSTAT to its maximum setting. The

HEAT light should come on. If HEAT light is not on, make sure the door is closed.

3. If the oven fails to light, push ON/OFF/OVEN COOL switch to the OFF position. Wait 5 minutes before trying

to relight the oven.

BEFORE FIRST USE

Before using the oven for the first time, it must be "burned in" to release any odors that might result from heating

the new surfaces in the chamber.

1. Using a clean damp cloth, wipe the inside of the oven, including the racks.

2. Close the oven doors, push the ON/OFF/OVEN COOL switch to the ON position, turn the THERMOSTAT

to 300°F (149°C) and allow the oven to cycle for 6 to 8 hours before turning the ON/OFF/OVEN COOL

switch OFF.

USING THE GCO2C OVEN

Preheating

1. Close oven doors. Push ON/OFF/OVEN COOL switch to ON position. The HEAT light will come on,

indicating that power to the oven is on.

2. Set THERMOSTAT as desired. Refer to SUGGESTED TIMER SETTINGS FOR ROLLED BEEF ROASTS

— MODEL GCO2C for suggested temperatures and times.

3. Prepare product and place in suitable pans. When READY light comes on, oven has reached desired

preheat temperature.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Sem comentários

Vulcan-Hart GCO2D Especificações Página 16